Echo 99944200485 - Manual (Page 15)

S
haft
h
edge
C
lipper
a
ttaChment
O
peratOr
'
S
m
anual
15
s
Torage
IMPORTANT
Always install blade cover when transporting or storing unit.
1. Clean and lubricate cutting blades and gear case.
2. Sharpen cutting blades as required.
3. Apply a light coating of clean 20W engine oil along entire length
of blades and on blade bolts.
4. Install blade cover onto hedge clipper cutting blades.
5. Store hedge clipper attachment in a dry, dust free place out of the
reach of children, using supplied storage hook.
Storage Hook Installation
1. Insert small end of hook into locating hole on attachment shaft.
2. Slide plastic cap onto end of attachment shaft.
s
peCIfICaTIons
MODEL ---------------------------------------------------- Shaft hedge Clipper Attachment
Length ------------------------------------------------------- 1250 mm (49.21 in.)
Width -------------------------------------------------------- 83 mm (3.23 in.)
Weight ------------------------------------------------------- 2.12 kg (4.68 lbs.)
Gear Case --------------------------------------------------- 4.27:1
Cutter -------------------------------------------------------- Double Reciprocating Blade - Double Edge
Effective Length ----------------------------------------- 502 mm (19.76 in.)
Pitch -------------------------------------------------------- 35 mm (1.4 in.)
Maximum Cut
Soft Materials --------------------------------------------- 25.4 mm (1 in.) Diameter
Woody Materials ----------------------------------------- 13 mm (1/2 in.) Diameter