Euro-Pro STEAM STATION EP7005 - Manual (Page 7)

Installing the Rubber Mat (10) onto the Iron Stand (8)
Please note that during transportation, the rubber mat (10) may come off its place.
• The iron stand (8) has 5 holes on the circumference of its top.
• The rubber mat (10) has 5 pins in the corresponding locations.
• Place the rubber mat (10) on top of the iron stand (8) and push each individual pin into its hole. (Fig. 1)
IMPORTANT: Never place the hot iron on the plastic iron stand without the
rubber mat on top of the iron stand.
Fig. 1
4