Euro-Pro STEAM STATION EP7005 - Manual (Page 13)

Steaming in a Vertical Position
• Burst-of-Steam (6) can also be applied when holding the iron in a vertical position. (Fig. 7)
this is useful when removing creases from hanging clothes, curtains, etc… The Burst-of-
Steam (6) feature can only be used while ironing at high temperatures at an interval of 5
seconds.
• The iron is also suitable for continuous vertical steam (and horizontal) but only on
maximum temperature.
Fig. 7
Water Spraying
• You can spray at any temperature by pushing on the spray button (4). (Fig 8)
• An electrical pump in the ironing stand (8) supplies the small reservoir (13) with spray water.
• Ensure that there is enough water in the water tank (8A).
• When the internal reservoir (13) is empty, after intensive spraying, pull the steam trigger (3)
for about 1 minute to refill it. Refilling is complete when you see/hear steam coming out
from the steam vents on the iron soleplate.
Note:
Filling and refilling of the internal reservoir must be executed at a temperature
setting between •• and MAX. It’s not possible to fill the reservoir at a temperature
setting below ••. (Fig. 9)
Fig. 8 Fig. 9
10