Electrolux U7101-4 - Manual (Page 38)

38
REPLACING AN OVEN LIGHT BULB
Disconnect the appliance from the
electricity supply before replacing the bulb.
The second oven requires a 300°C 25 watt small
Edison Screw bulb.
The main oven requires a 300°C 20 watt heat -
resistant halogen bulb. Always use a cloth to take
hold of a halogen light to avoid burning on of fatty
deposits.
1. Make sure the appliance is cool before you
replace a bulb.
2. Open the door and remove the shelves and
wirework runners.
3. Pull the glass bulb cover towards you and then
pull it off. If necessary use a screwdriver to
carefully lever off the cover, taking care not to
damage the oven cavity.
4. (Second Oven) Unscrew the bulb by turning it to
the left.
5. (Main Oven) Gently pull the bulb out.
6. Fit a new bulb and then replace the glass bulb
cover.
7. Refit the wirework runners and replace the oven
shelves.
8. Restore the electricity supply and reset the time of
day.