Elecom UCAM-B1C30TBK SETUP GUIDE - Manual (Page 6)

6 7
5.
Click on the button.
Installation will begin.
6. Click on the button.
7. Peel off the sticker from the USB connec-
tor of the PC camera.
8. Plug the USB connector of the PC cam-
era into a USB port of the PC.
Though this PC camera consumes a
maximum 100 mA of power, because
of specifications, connect it to a USB
port that supplies 500 mA.
The PC camera will be recognized automati-
cally.
The PC camera may be connected
and disconnected while power to the
PC is ON.
Do not try plugging the USB connector
in upside-down.
9.
Click on the button.
If asked for the Windows Me CD-ROM,
load the CD-ROM into the drive and
click on the
button.
10. Click on the button.
This completes Driver Utility installation.
Next, check that the Driver Utility was correctly
installed. Go to pg. 10.