Markbass Minimark 802 - Manual (Page 9)

09
9 MINIMARK TEChNICAL DETAILS
INPUTS
INPUT
impedance: 500 Kohm, max. voltage: 10 Vpp
AUX INPUT impedance: 33 Kohm, max. voltage: 15 Vpp
CONTROLS
VOLUME (LEVEL)
-45 dB to +28 dB range
GROUND LIFT switch on rear panel
SPEAKER ON/OFF switch on rear panel
EQUALIZATION
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz - 20 kHz
VPF (Variable Pre-shape Filter) center frequency 380 Hz
OUTPUTS
LINE
OUT balanced XLR, max. voltage 5 Vpp; GND lift
hEADPhONE OUT 1/8” mini plug, max voltage 10 Vpp (30 - 600 ohm)
POWER 250W RMS @ 4 ohms, 150W RMS @ 8 ohms (AES Standard)
OThER
SPEAKER
2x8” neodymium woofers
TWEETER Piezo
PREAMP Solid state
POWER AMP Analog
POWER SUPPLY Digital
FREQUENCY RESPONSE 53 Hz to 18 kHz
SENSITIVITY 96 dB SPL
hEIGhT 19.60 in. / 49.8 cm
WIDTh 10.27 in. / 26.1 cm
DEPTh 15.47 in. / 39.3 cm
WEIGhT 23.37 lbs / 10.6 kg
POWER REQUIREMENT 100V; 120V; 230V; 240V - 50/60 Hz
(Version factory preset inside the equipment)
Markbass apparatuses are manufactured to be sold and used in the
country of purchase, and are factory preset to that country’s voltage.
Due to homologation issues, the voltage may not be changed.
FUSE
EUROPE
3.15A 250V T 5x20
AUSTRALIA/UK 3.15A 250V T 5x20
USA/CANADA 6.3A 250V T 5x20
JAPAN 6.3A 250V T 5x20
10. MINIMARK BLOCK DIAGRAM