Markbass Minimark 802 - Manual (Page 6)

5. MICROMARK 801 TEChNICAL DETAILS
INPUTS
INPUT Impedance: 500 Kohm, max. voltage: 8 Vpp
AUX INPUT Impedance: 33 Kohm, max. voltage: 20 Vpp
CONTROLS
VOLUME (Level) –60 dB to +25 dB range
GROUND LIFT Switch on rear panel
SPEAKER ON/OFF Switch on rear panel
EQUALIZATION
VPF (Variable Pre-shape Filter) Center frequency 380 Hz (cut)
OUTPUTS
LINE OUT Balanced XLR, max. voltage 10 Vpp
hEADPhONE OUT 1/8” mini plug, max voltage 12 Vpp (30 ohm); 45 Vpp (600 ohm)
OThER
SPEAKER 1x8” neodymium woofer (MICROMARK 801)
SPEAKER / TWEETER OUT Optional speaker/tweeter plugs into jack on rear panel
PREAMP Solid state
POWER AMP Analog
POWER SUPPLY Analog
FREQUENCY RESPONSE 60Hz to 8 kHz (18 kHz with optional tweeter) (MICROMARK 801)
SENSITIVITY 100 db SPL
DIMENSIONS 10.55” x 10.55” x 10.31” / 26,8 x 26,8 x 26,2 cm (MICROMARK 801)
WEIGhT 11.46 lbs / 5,2 kg (MICROMARK 801)
POWER 45W @ 8 ohms / 60W @ 4 ohms (AES standard)
POWER REQUIREMENT 100V; 120V; 230V; 240V 50/60Hz
(Version factory preset inside the equipment)
Markbass apparatuses are manufactured to be sold and used in the
country of purchase, and are factory preset to that country’s
voltage.
Due to homologation issues, the voltage may not be changed.
FUSE
EUROPE 1A 250V T 5x20
AUSTRALIA/UK 1A 250V T 5x20
USA/CANADA 2A 250V T 5x20
JAPAN 2A 250V T 5x20
6. MICROMARK/MICROMARK 801 BLOCK DIAGRAM
7. MICROMARK/MICROMARK 801 VPF GRAPh
06