Oscillator mixer – LinPlug MorphoX User Manual
Page 15
![background image](https://www.manualsdir.com/files/821069/content/doc015.png)
Oscillator Mixer
In the Oscillator Mixer you can adjust the volume of the two oscillators and
the noise source.
The dials Osc 1 and Osc 2 can be turned into “red”, which means that their
volume can be turned so high that it saturates at the filter input and thus
produces new harmonics.
The Ring (ring-modulation) parameter below the Osc 2 dial allows a
gradual adjustment of how the output of Oscillator 2 is made from Oscillator
2 and its integrated Amplitude- and Ring-Modulator (see glossary for
explanation of Amplitude- and Ring-Modulation).
Turned fully left the output of Oscillator 2 is purely Oscillator 2. Turned fully
right the output of Oscillator 2 is fully the ring modulation result of Oscillator
1 and Oscillator 2. In middle position the output is mix of Oscillator 2 and
the ring modulation result (which is the same as Amplitude Modulation or in
short AM).
MorphoX user manual 1.1.0
page 15