Electrolux U33024 EOB31010X - Manual (Page 20)

• Brillo/Ajax pads or steel wool pads
• Chemical oven pads or aerosols
• Rust removers
• Bath/Sink stain removers
Clean the outer and inner door glass us-
ing warm soapy water. Should the inner
door glass become heavily soiled it is
recommended that a cleaning product
such as Hob Brite is used. Do not use
paint scrapers to remove soilage.
Cleaning materials
Before using any cleaning materials on
your oven, check that they are suitable
and that their use is recommended by
the manufacturer.
Cleaners that contain bleach should
NOT be used as they may dull the sur-
face finishes. Harsh abrasives should
also be avoided.
Oven Cavity
The enamelled base of the oven cavity is
best cleaned whilst the oven is still
warm. Wipe the oven over with a soft
cloth soaked in warm soapy water after
each use. From time to time it will be
necessary to do a more thorough clean-
ing, using a proprietary oven cleaner.
DO NOT attempt to clean catalytic
liners.
Care of Catalytic Liners
As cooking produces oil, fats, splashes
of food, etc., catalytic enamel destroys
them. To aid this process it is a good
idea to run the oven for an hour or two
per week, without food, to ensure con-
tinued good performance from the
Catalytic liners.
To clean the oven cavity, proceed as fol-
lows:
1. Remove the oven accessories, if
present (e.g. pans, grids, baking
tray, dripping pan, etc.). Do not leave
anything inside the oven.
2. Turn the oven function control knob
to the fan cooking function
3. Turn the thermostat control to 250°
C.
4. Allow the oven to run empty for
approximately 45 minutes.
5. Open a window for ventilation.
This procedure should be repeated with
the inner grill cooking function grill for
approximately 5 minutes.
If the oven cavity is cold, let the oven run
for 60 minutes.
Do not attempt to clean catalytic
enamel.
Hints and Tips
• Manual cleaning of the Catalytic liner
is not recommended. Damage will oc-
cur if soap impregnated steel wool
pads, aerosol cleaners and any other
abrasives are used.
• Slight discolouration and polishing of
the Catalytic surface may occur in
time. This does not affect the Catalytic
properties in any way.
• Follow the recommendations in
“Cooking to reduce soilage”.
20 electrolux cleaning and maintenance