Emerson EWC20D5 A - Manual (Page 24)

– 24 – EN
AUDIO LANGUAGE
The unit allows you to select a language during DVD
disc (if multi languages are available) playback.
1 Hit [AUDIO] during playback.
2 Hit [AUDIO] repeatedly to select your
desired language.
NOTE:
¡ Hitting [AUDIO] may not work on some DVDs
with multiple audio languages (e.g. DVDs which
allow audio language setting on the disc menu).
DVD-V
STEREO SOUND MODE
1 Hit [AUDIO] repeatedly during playback to
select between STEREO, L-CH or R-CH.
¡ STEREO - both right and left
channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
NOTE:
¡ If the Virtual Surround setting is ON, the sound mode
will be fixed to STEREO, and can not be changed.
CD
The unit allows you to select a language for subtitles
during DVD disc (if available) playback.
1 Hit [SUBTITLE] during playback.
¡ The subtitle language will be
displayed on the display bar at
the top of the screen.
2 Hit [SUBTITLE] repeatedly to select your
desired subtitle language.
3 To turn off subtitles, hit [SUBTITLE] repeat-
edly until OFF appears.
NOTES:
¡ Hitting [SUBTITLE] may not work on some DVDs
with multiple subtitle languages. In this case, set it
on the disc menu. (Operation varies between discs.
Refer to the manual of the disc.)
¡ If the desired language is not shown after hitting
[SUBTITLE] several times, the disc does not have
subtitles in that language.
¡ When “NOT AVAILABLE”
appears on the TV screen, it
means no subtitle is recorded
on the scene.
¡ If you choose a Language that has a 3 letter language
code, the code will be displayed every time you
change the Subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead.
(Refer to page 27.)
DVD-V
SUBTITLE LANGUAGE
CHANGING THE SETTINGS
1.ENG/6 1.ENG Dolby D 3/2.1ch 48k / 3
STEREO
NOT AVAILABLE