Emerson EWC20D5 A - Manual (Page 13)

– 13 – EN
SELECTING THE LANGUAGE
1
Plug in the unit power cord
Plug the unit power cord into a standard
AC outlet.
NOTE:
• If any digits appear in the corner of
the screen, hit [POWER] without
unplugging the power cord.
Make sure ...
• Hit [POWER] to turn on the unit.
NOTE:
• This function effects only the language on the
screen menu and not the audio source.
2
Select “LANGUAGE”
Hit [SETUP] on the remote control.
Press [K
K /L L ] to point to “LAN-
GUAGE”.
3
Select “ENGLISH”, “ESPAÑOL” or “FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using [ENTER].
4
Exit the Language mode
Hit [SETUP] to return to TV mode.
NOTE: If for some reason the menu is in Spanish or
French, press [K
K /L L ] to point to “IDIOMA
[ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then
hit [ENTER], then hit [SETUP] on the remote con-
trol.
TV
CHANNEL SET UP
You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the unit channel selector to the output
channel of the cable box or satellite box (Ex CH3),
then select the channel to be viewed on the Cable
Box or Satellite Box.
Make sure ...
• Hit [POWER] to turn on the unit.
1
Select “CHANNEL SET UP”
Hit [SETUP] on the remote control.
Press [K
K /L L ] to point to “CHAN-
NEL SET UP”.
Then hit [ENTER].
2
Begin auto ch programming
Press [K K /L L ] to point to “AUTO CH
PROGRAMMING”.
Then hit [ENTER].
The tuner scans and memorizes all
the active channels in your area.
3
After scanning
The tuner stops on the lowest memorized channel.
• When AUTO CH PROGRAM-
MING is activated where there is
no TV signal input, “NO TV
SIGNALS” will appear on the
display after the completion of
the channel scanning.
• The unit may recognize CATV channels to be TV
channels by the receiving conditions. In this case,
try auto ch programming again in the fine receiv-
ing conditions.
TV
SET UP FOR USE
TV SECTION
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
- TV SETUP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO CH PROGRAMMING
NO TV SIGNALS