Bang & Olufsen BeoConnect (for Mac) - Manual (Page 7)

7
Connect to products Connection to a product on the network, such as BeoSound 5,
can take place when the product is added to the ‘Product List’.
You can select any one of the products in the list for connection.
When connecting to the product for the first time, you must
enter the product password. If you change the product
password at a later date, you will be asked to enter the new
password, when connecting to the product.
The currently connected product is shown in the list with a
check mark in front of the product.
If a product is already connected, and you select it again, it is
disconnected.
The check mark is not displayed while connection is in progress
or if the connection fails.