Bang & Olufsen BeoVision 7-32 Supplement - Manual (Page 7)

The STAND ADJUSTMENT menu in your
television is different compared to the
Reference book. During first-time setup, and
if your setup includes a motorised stand or
wall bracket, you are prompted to calibrate
the outer positions of the motorised move ment.
Note! The motor function will not work until the
calibration process described below has been
completed!
When the STAND ADJUSTMENT menu
appears …
> Move to SET LEFTMOST POSITION and press
to turn the television towards the left, until it
has reached the position you wish to restrict the
movement to.
> Move to SET RIGHTMOST POSITION and press
to turn the television towards the right, until it
has reached the position you wish to restrict the
movement to.
> Press GO to store all settings made during first-
time setup.
The STAND POSITIONS menu appears, and you
can now make your preferred preset positions for
the television to turn to – as described in the
Reference book on page 22.
Stand adjustments Automatic standby
The standby options have changed compared
to the Reference book.
When you register a set-top box in the
CONNECTIONS menu, you can also select
standby options for your set-top box. This
means that you can select if the connected
set-top box should switch to standby
automatically.
The options are:
OFF AT SOURCE CHANGE … The set-top box is
switched on when selected, and off when
another source is selected.
OFF AT TV STANDBY … The set-top box is
switched on when selected, and off when the
television is switched off.
ALWAYS ON … The set-top box is always on and
never switched off.
MANUAL CONTROL … The set-top box is not
switched on and off automatically. You switch it
on and off manually by means of the Bang &
Olufsen remote control.
STAND ADJUSTMENT
SET LEFTMOST POSITION
SET RIGHTMOST POSITION
turn turn
store GO
STAND ADJUSTMENT
SET LEFTMOST POSITION
SET RIGHTMOST POSITION
SETTINGS STORED
STAND POSTIONS
VIDEO
AUDIO
STANDBY
STAND ADJUSTMENT
store
select GO
7