LeMond RevMaster Pilot - Manual (Page 26)

Page 26
APPENDIX
Changing the Console and Transmitter Codes
The console and the transmitter have dip switches that
allow you to change the transmission code back and for the
between a total of 16 different number codes (00-15) to help
reduce cross talking between bikes in a class environment.
Cross talking is when one bike picks up the RF signal from
another bike, and interferes with the displayed numbers on the
console.
• As long as the transmitter and console “dip” switches are
set to the same number code, the two will communicate.
• To change the number codes, simply flip the dip switches
on each component to the same number code.
The console dip switches
are located in the battery
compartment
The transmitter dip switches
are located below the
battery compartment