LeMond RevMaster Pilot - Manual (Page 18)

Page 18
KEY FUNCTIONS
[START]
The start key will start the timer and enable the cadence meter to
begin calculating HR and Kcal values.
[CLEAR]
•
A short press (< 3 sec) of the clear key will reset the
time, distance and calorie measurements.
• Pressing and holding the clear key (> 3sec) will reset the
AVG (average) and MAX (maximum) values for
cadence and HR measurements. In addition, the calorie
calculation values will be reset to their default values
[STOP]
The stop key will stop the calculation of the time, distance and
calorie measurements without resetting the values of the
measurements. Pressing the start key again will restart the
console
[CADENCE]
The cadence key allows you to change the cadence section of
the display window between INST (instantaneous) RPM, AVG
(average) RPM, MAX (maximum) RPM, INST (instantaneous)
MPH/KPH, AVG (average) MPH/KPH, and MAX (maximum)
MPH/KPH.
[
∧∧∧∧∧
]
The up arrow allows you to increase the default max HR, min
HR, ambient HR, age, and weight for target heart zone training
and calorie calculations.