Lanner LEC-7220 - Manual (Page 13)

13
Board Layout
Chapter 3
Embedded and Industrial Computing
Connectors and Jumpers List
The table below lists the function of each of the board
jumpers and connectors by labels shown in the above
section. The next section in this chapter gives pin
definitions and instructions on setting jumpers.
Table 3.1 Connector List for LEB-7220
Labels Function Pin Definition Reference
Page
COM1/COM2 RS-232 Ports with DB9 Connector p13
CON1 SATA HDD Power Connector P13
JP1 Clear CMOS Jumper P14
JRI1/JRI2 COM1/COM2 Pin 9 Function Selection P13
LANB1~6 Six RJ-45 with LED P13
LPC1 Low Pin Count Interface Reserved for factory use
SPIROM1 SPIROM1 Connector Reserved for factory use