Chapter 1, Chapter 1: introduction, Introduction – Lanner VES-220 User Manual
Page 4: System specification, Ordering information

1
Introduction
Chapter 1
Embedded and Industrial Computing
Chapter 1:
Introduction
Thank you for choosing the VES-220. The VES-220 is
Lanner’s flagship COM Express R2.0 Type 2 module. It
features the new D2550 processor with NM10 chipset.
This COM Express module provides a rich I/O capabilities
via high-bandwidth interfaces such as PCI, PCI Express,
Serial ATA (3Gb/s), Parallel ATA, LPC, and Hi-Speed USB 2.0
connectivity.
Other I/O capabilities include general-purpose I/O (GPIO),
SMbus, and 2-ch 24-bit LVDS, and audio and VGA display
ports as well as Intel® 82574L (PHY) Gigabit Ethernet.
System Specification
Ordering Information
System
CPU
Intel® Atom™ D2550 Processors
BIOS
AMI 16Mbit SPI BIOS
System Chipset
Intel® NM10 Chipset
System Memory
One 204-pin SODIMM Socket, Supports Up to 4 GB
DDR3 800 / 1066 SDRAM
Expansion
4 PCIe x1, 2 PCI
I/O
MIO
2 SATA ports, 1 PATA, LPC, SMbus
USB
8 x USB 2.0
DIO
4-bit GPI and 4-bit GPO
Display
Chipset
D2550 Integrated Graphics
One CH-7511B Onboard
Resolution
VGA Mode: 1920 x 1200
LVDS Mode: 1920 x 1080
LVDS Interface
Dual-channel 24-bit LVDS
Audio Interface
Chipset
Intel® NM10 Integrated
Interface
Intel® High Definition Audio
Ethernet
LAN Chip
Intel® 82574L Gigabit Ethernet
Ethernet Interface
10/ 100/ 1000 Base-Tx Gigabit Ethernet Compatible
Mechanical & Environmental
Power Requirement
+9 ~ +19 V
ACPI
Single Power ATX Support S0, S3, S4, S5, ACPI 3.0
Compliant
Power Type
AT / ATX
Operating Temperature
0 ~ 60°C (32 ~ 140°F)
Storage Temperature
-40 ~ 75°C (-40 ~ 167°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-condensing
Size (L x W)
125 mm x 95 mm (5” x 3.7”)
Weight
0.2 kg (0.44 lbs)
VES-220
COM Express® R2.0 Type 2 Module with Intel® Atom
TM
D2550
CPU and NM10 Chipset