Lanner 2U Rack Mount - Manual (Page 8)

Software User Manual Version 1.1
6
3.2 Mounting the outer rails to the rack
Use the following procedures to mount the outer rails to the rack.
1. Install the outer rail by attacking the rail bracket to the posts of the rack with two
screws. (Rail bracket screws are not included; use the original manufacture’s rack
bracket screws.) Do not completely tighten the screws; leave them loose so that the
middle rail can slide for adjustment.
2. Extend and adjust the rear bracket to meet the appropriate depth of the rack and
install it to the rack post firmly with rack bracket screws.
3. Repeat step 1 and 2 above to install the other rail to the rack.