Lanner FW-8771 - Manual (Page 29)

24
BIOS Settings
Chapter 4
Network Application Platforms
Option Description
Auto Allow the system to detect the presence of USB
devices at startup. If detected, the USB controller
legacy mode is enabled If it is not detected, the
USB control er legacy mode is disabled.
Enabled Enable the support for USB devices on legacy
operating system
Disabled Disable this function.
USB 3.0 Support
Enable or disable USB3.0 support
XHCI/EHCI Hand-Off
It allows you to enable support for operating systems
which do not have the eXtensible Host Controller
Interface/Enhanced Host Controller Interface hand-off
(EHCI hand-off ) feature for USB devices.
Option Description
Enabled Enable this feature
Disabled Disable this feature
USB Mass Storage
Select to enable or disable the system to mount the USB
mass storage device.