Lanner FW-7582 - Manual (Page 5)

1
Introduction
Chapter 1
Network Application Platforms
Chapter 1:
Introduction
Thank you for choosing the FW-7582. Built around the Intel
H61 chipset, the FW-7582 is a 1U network communication
appliance that the supports an array of CPUs in LGA1155 up
to 65W, including 2nd Generation Intel® Core i3, Pentium
G850, Celeron G540 and upgradable to 3rd Generation
Corei3-3220 and Pentium G2120. The FW-7582 comes
with 1console port and 6 Gb Ethernet ports with 3 pairs
capable of abnormal state packet bypass.
Below are key features of the FW-7582:
Dual-channeled DDR31066/1333MHz SDRAM DIMM 1.
sockets to support up to 16 GB of unbuffered, non-
ECC DDR3 memory (Dual Channel utilize two 64-bit
data channels for higher data throughput.)
Low-Profile expansion for connecting
2. the PCI-E slot
using the (x)8 lane architecture to add customized
capabilities.
Lanner Generation 3 Bypass: The Lanner Gen 3 Bypass
3.
can fully take control of each bypass pair in 3 different
states, i.e. powering off, Just-on, powering on. It also
features dedicated watchdog timers for each bypass
pair to enable bypass automatically when system
failures occur.
Form Factor 1U Rackmount
Platform
Processor Options
2nd generation Intel® Core®
i3-2120, Pentium® G850 and
Celeron® G540
3nd generation Intel® Core®
i3-3220 and Pentium G2120 on
LGA1155
Chipset Intel H61
BIOS AMI BIOS 64Mbit SPI Flash ROM
System Memory
Technology
Dual-channel DDR3 1066/1333MHz,
Non-ECC, Unbuffered
Max. Capacity 16GB
Socket 2 x 240P DIMM
OS Support
Windows 2000, 2003, XP, 7. Linux
kernel 2.4 and up, OpenBSD, FreeBSD
Storage
HDD Bays 1 x 2.5” or 1 x 3.5”
CompactFlash 1 x Type II CompactFlash
Networking
Ethernet Ports 6 x GbE RJ45
Bypass 3 Pairs G3
Controllers
6 x Intel 82583V for SKU A,B,C,
82574L for SKU D
Ethernet Modules N/A
Management Port N/A
Security Acceleration N/A
I/O Interface
Reset Button
1 x reset button
Software reset by default
Console 1 x RJ45
USB 2 x USB 2.0
IPMI via OPMA slot N/A
Expansion
PCIe 1 x PCI-E*8 expansion
PCI N/A
Cooling
Processor CPU heatsink with fan duct
System
3 x cooling fans with smart fan
control
Environmental
Parameters
Temperature, ambient
operating / storage
0 ~ 40º C / -20~70º C
Humidity (RH),
ambient operating
/ ambient non-
operating
5~90%, non-condensing
Miscellaneous
LCD Module 2 x 20 characters
Watchdog Yes
Internal RTC with Li
Battery
Yes
Physical
Dimensions Dimensions (WxHxD) 431 x 44 x 305 mm
Weight
7 kg
Power
Type / Watts 1U ATX SPS / 220W
Input AC 100~240V @50~60 Hz
Approvals and Compliance CE emission, FCC Class A, RoHS
System Specifications