Running screen, Gas selection, Sensitivity – Ion Science GasCheck Tesla User Manual
Page 10: Battery status, Backlight, Gas measurement, Sound indication, Bar graph, Peak hold
GASCHECK TESLA MANUAL
Ion Science Ltd
Page 10 of 25
Unrivalled Detection. www.ionscience.com
Running screen
GasCheck Tesla displays the 'Running screen' whenever the instrument is being used to detect leaking gas,
the illustration below outlines the various information and icons.
Gas selection
The GasCheck Tesla displays the gas being measured in the top left of the running screen. The GasCheck
Tesla will display the gas as selected at the factory, however the GasCheck G3 model has a range of gases
that can be selected via an internal gas table.
Sensitivity
GasCheck Tesla has three (3) sensitivity levels, X100 (times one hundred) is most sensitive, X10 (times ten)
is mid-range and X1 (times one) is least sensitive. See the sensitivity of various gases on the table under
‘Functions (continues), Gas Selection’.
Battery status
When the battery symbol is filled in the battery is full, when just an outline the battery is exhausted.
Backlight
The backlight symbol shows the status of the backlight even in bright daylight.
Gas measurement
The GasCheck Tesla measures the leak rate of gas leakage in which ever units are selected.
Sound indication
This symbol shows if the sounder is on or off, if the semi-circle (on the right) of the symbol is present then the
sound is switched on, if not the sounder is switched off. The beep that occurs with each key press cannot be
switched off.
Bar graph
The bar graph increases as gas is detected. This graph is not scaled and should be used for indication only.
The GasCheck Tesla has no measured units so relies on this bar graph to indicate leakage, when gas is
detected and the bar graph has reached its maximum level, a different sensitivity level can be selected to
give a wider detection range.
Peak hold
When selected, peak hold displays the maximum measurement on the display. Pressing the ENTER key
resets the reading but also logs the peak reading in memory.
Gas selection
Sensitivity levels
Gas measurement
Bar graph
Battery status
Backlight indicator
Sound indicator
Peak hold indicator