Ericsson LBI-39175A User Manual
Page 22
LBI-39175A
22
Operational Software Fatal System Errors
ERROR NAME
MESSAGE
CODE
DESCRIPTION
RADC_PITD_ERROR
TRACKING
200
Personality tracking data error. Re-program the tracking data.
RADC_PIHW_ERROR
PERSDATA
201
Personality hardware data error. Re-program the personality.
RADC_FREQ_ERROR
FREQDATA
202
Personality frequency data error. Re-program the personality.
RADC_PITD_MALLOC_ERROR
SOFTWARE
203
Personality tracking data malloc error. Re-program the tracking data.
RADC_PITD_CKSUM_ERROR
SOFTWARE
204
Personality tracking data checksum error. Re-program the tracking data.
DACS_NO_LOCK
NO LOCK
300
Synthesizer did not lock or became unlocked. Check the frequencies in the PC
programmer and re-program the radio personality.
DACS_MODEM_FATAL_ERROR
SOFTWARE
301
Unable to correctly configure the modem for EDACS operation. Re-program
the personality.
DACS_RADC_FAILURE
SOFTWARE
302
Power cycle the radio.
DACS_MODEM_RXOVR
SOFTWARE
304
Hardware Modem overflow. Power cycle the radio.
DACS_MODEM_RXAVR
SOFTWARE
305
Power cycle the radio.
CONV_RADC_ERROR
SOFTWARE
400
Error calling RADC function. Power cycle the radio.
CONV_NOLOCK_ERROR
NO LOCK
401
Synthesizer became unlocked. check the frequencies in the PC programmer
and re-program the radio personality.
CONV_PUT_UIMSG_ERROR
SOFTWARE
402
UI message buffer not enabled. Power cycle the radio.
CONV_MODEM_RXOVR
SOFTWARE
403
Conventional DIGV modem overflow.
CONV_MODEM_RXAVR
SOFTWARE
404
Conventional DIGV modem underflow.
CONV_MODEM_FATAL_ERROR
SOFTWARE
405
Unable to correctly configure the modem for conventional DIGV operation.
CONV_PERS_ERROR
PERSDATA
407
Conventional personality error.
PI_NOPERS_ERROR
PERSDATA
500
Personality data is not present. Program the personality.
PI_CRC_ERROR
PERSDATA
501
Flash personality CRC did not match EEPROM. Re-program the personality.
PI_DESC_CRC_ERROR
PERSDATA
502
Crucial personality data has incorrect CRC. Re-program the personality.
PI_MALLOC_ERROR
SOFTWARE
503
Could not allocate memory to store crucial personality data.
UI_FATAL_DEVICE_ERROR
PERSDATA
600
Input/Output device error.
UI_FATAL_SWTO_
MALLOC_ERROR
SOFTWARE
601
Software memory error.
UI_FATAL_SWTO_MAX_ERROR
SOFTWARE
602
Software error, power cycle the radio.
UI_FATAL_WINDOW_MAX_
ERROR
SOFTWARE
603
Too many open windows.
UI_FATAL_WINDOW_MALLOC_
ERROR
SOFTWARE
604
Software memory error.
UI_FATAL_MESSAGE_INVPARM
SOFTWARE
605
Invalid parameter to UI_PUT_MESSAGE(). software error, report how error
was encountered.
UI_FATAL_RI_MSGBUF_FULL
SOFTWARE
606
UI Task message buffer full error. Software error, report how error was
encountered.
UI_FATAL_RISYS_MSGBUF_FULL
SOFTWARE
607
Radio Interface System (EDACS/CONV) task message buffer full.
UI_FATAL_CI_MSGBUF_FULL
SOFTWARE
608
CI Task message buffer full.
UI_FATAL_DEVICE_
NOTSUPPORTED
PERSDATA
609
I/O device type (from personality) not supported.
UI_FATAL_AUXIO_MALLOC_
ERROR
SOFTWARE
610
Software memory error.
UI_FATAL_NET_DEVICE_ERROR
SOFTWARE
611
Network I/O device error
UI_FATAL_INVALID_CUID
SOFTWARE
612
CU ID is invalid or CU not connected. Insure that CU ID is CUA and DUAL
is disabled in personality.
UI_FATAL_NO_TONE_DATA
SOFTWARE
613
No tone data is available in personality.
UI_FATAL_UII0_MSGBUF_FULL
SOFTWARE
614
UI I/0 BBOS message buffer full.
AEGIS_ADI_OVERFLOW
SOFTWARE
801
ADI Transmit event not serviced in time and buffer has overflown.
AEGIS_RXBUF_MALLOC_ERROR
SOFTWARE
802
No memory available.
AEGIS_KEYLOAD_MALLOC_
ERROR
SOFTWARE
803
No Keyloader table memory available.
AEGIS_KEYLOAD_ERROR
SOFTWARE
804
General Keyload error has occurred.
AEGIS_DATAMEM_MALLOC_
ERROR
SOFTWARE
805
No memory is allocated for data.
AEGIS_KEYLOAD_NOTABL
SOFTWARE
806
No key table was found in EEPROM.