beautypg.com

5 notes for safe operation, Warning – Yaskawa MP2000 Series Machine Controller Safety Precautions User Manual

Page 5

background image

5 Notes for Safe Operation

E-3

5 Notes for Safe Operation

Read this manual thoroughly before checking products on delivery, storage and transportation,
installation, wiring, maintenance and inspection, and disposal of the MP2200/MP23†††/
MP2400 Machine Controller.

• Before starting operation with a machine connected, make sure that an emergency stop can

be applied at any time.

Failure to observe this warning may result in injury.

• Never touch the inside of the unit.

Failure to observe this warning may result in electric shock.

• Do not remove the front cover while the power is ON.

Failure to observe this warning may result in electric shock.

• Follow the procedures and instructions for trial operation precisely as noted in the Machine

Controller MP2200 User’s Manual (Manual No.: SIEP C880700 14), the Machine Controller
MP2300 Basic Module User’s Manual (Manual No.: SIEP C880700 03), the Machine Con-
troller MP2300S Basic Module User’s Manual (Manual No.: SIEP C880732 00), the Machine
Controller MP2310 Basic Module User’s Manual (Manual No.: SIEP C880732 01), and the
Machine Controller MP2400 User’s Manual (Manual No.: SIEP C880742 00).

Malfunctions that occur after the servomotor is connected to the equipment not only damage the
equipment, but may also cause an accident resulting in death or injury.

• Do not damage, press, exert excessive force or place heavy objects on the cables.

Failure to observe this warning may result in electric shock, stopping operation of the product, or
burning.

• Do not modify the product.

Failure to observe this warning may result in injury or damage to the product.

• Do not come close to the machine immediately after resetting momentary power loss to

avoid an unexpected restart. Take appropriate measures to ensure safety against an unex-
pected restart.

Failure to observe this warning may result in injury.

• Installation, disassembly, or repair must be performed only by authorized personnel.

Failure to observe this warning may result in electric shock or injury.

WARNING