E.Digital Treo 10 - Manual (Page 44)

36
How to Use and Enjoy Your Treó 10
3. Use the up and down arrows to highlight
the band you wish to change.
4. Use the right and left arrows to change the
settings.
5. When you’re finished, press Menu to save
your settings and return to the Main Menu.
6. Press Menu again to return to the Play
screen.
Band 1 to Band 5 range from
bass to treble, respectively.
Turning On the Backlight
When the Backlight setting is on, press any
button to illuminate the display during low-
light situations. You can set the backlighting to
be:
• never on
• shut off automatically after a specified time
interval (one to five seconds)
When the backlight is on, it
drains the battery. If you leave
the backlight on, make sure you
monitor battery life.
To change the backlight setting:
1. Using the up and down arrows, highlight
Backlight.
2. Scroll through the available settings with
the right and left arrows.
3. Press Menu to save your settings and
return to the Play screen.
Selecting the Play Mode
The Treó 10 can play music in a number of
different ways.
In this mode Your player will:
PlyAll Play all stored music once.
PlyGen Play the selected genre once.