Yaskawa AC Servo Drive Rotary Servomotor Safety Precautions - Manual (Page 8)

E-6
„
Installation Precautions
NOTICE
• A SERVOPACK or Servomotor is a precision device. Do not drop it or
subject it to strong shock.
There is a risk of failure or damage.
• Do not subject connectors to shock.
There is a risk of faulty connections or damage.
• If disinfectants or insecticides must be used to treat packing materials
such as wooden frames, plywood, or pallets, the packing materials
must be treated before the product is packaged, and methods other
than fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core tem-
perature of 56
°C for 30 minutes or more.
If the electronic products, which include stand-alone products and prod-
ucts installed in machines, are packed with fumigated wooden materials,
the electrical components may be greatly damaged by the gases or
fumes resulting from the fumigation process. In particular, disinfectants
containing halogen, which includes chlorine, fluorine, bromine, or iodine
can contribute to the erosion of the capacitors.
• Do not overtighten the eyebolts on a SERVOPACK or Servomotor.
If you use a tool to overtighten the eyebolts, the tapped holes may be
damaged.
CAUTION
• Do not touch the key slot with your bare hands on the shaft end on a
Servomotor with a Key Slot.
There is a risk of injury.
• Securely mount the Servomotor to the machine.
If the Servomotor is not mounted securely, it may come off the machine
during operation.
• Install the Servomotor or SERVOPACK in a way that will support the
mass given in technical documents.
• Install SERVOPACKs, Servomotors, and regenerative resistors on non-
flammable materials.
Installation directly onto or near flammable materials may result in fire.
Continued on next page.