Yaskawa AC Servo Drive Rotary Servomotor Safety Precautions - Manual (Page 7)

E-5
„
Transportation Precautions
NOTICE
• Do not install or store the product in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed prod-
uct specifications
• Locations that are subject to relative humidities that exceed product
specifications
• Locations that are subject to condensation as the result of extreme
changes in temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable materials
• Locations that are subject to dust, salts, or iron powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product
specifications
• Locations that are subject to radiation
If you store or install the product in any of the above locations, the prod-
uct may fail or be damaged.
• Although machined surfaces are covered with an anticorrosive coating,
rust can develop due to storage conditions or the length of storage.
If you store the product for more than six months, reapply an anticorro-
sive coating to machined surfaces, particularly the motor shaft.
• Consult with your Yaskawa representative if you have stored products
for an extended period of time.
CAUTION
• Transport the product in a way that is suitable to the mass of the prod-
uct.
• Do not hold onto the cables or motor shaft when you move a Servomo-
tor.
There is a risk of disconnection, damage, or injury.
• Do not use the eyebolts on a SERVOPACK or Servomotor to move the
machine.
There is a risk of damage or injury.
• When you handle a SERVOPACK or Servomotor, be careful of sharp
parts, such as the corners.
There is a risk of injury.
• Do not place an excessive load on the product during transportation.
(Follow all instructions on the packages.)
There is a risk of injury or damage.