Encore electronic ENLWI-NX2 - Manual (Page 7)

IDENTIFYING EXTERNAL COMPONENTS
LED
Link
The Link LED indicator lighted green when the ENLWI-NX2 802.11n Wireless
LAN PCI Adapter is connected to wireless network successfully.
ACT (Activity)
The ACT LED indicator when blinking green, the ENLWI-NX2 802.11n Wireless
LAN Adapter is transmitting or receiving data.
Check the installation
The LEDs of the ENLWI-NX2 Wireless LAN Adapter are clearly visible and the
status of the network link can be seen instantly:
1. Once the device is plugged-in to the computer motherboards PCI slot, the LED
of the Wireless LAN Adapter will light up indicating a normal status.
2. When the device plugged-in to thecomputer’s PCI slot and the driver was
installed, the ACT LED indicator will start blinking on and off, this means that
the device is starting to scan the wireless devices near and around the Wireless
LAN Adapter’s location.
3. While the Wireless LAN Adapter linked up and transmitting data to the Access
Point or to other Wireless LAN station, the Link LED will stay green.
3