Electrolux EDB710 - Manual (Page 29)

TO REMOVE THE WIREWORK
RUNNERS
The wirework runners in both ovens can be
removed for cleaning.
1. Remove all shelves and furniture from the oven.
2. Hold the wirework at the bottom, unclip from the
cavity side and gently pull towards the centre of
the oven.
3. Unhook the runner at the top and remove it
from the cavity.
4. To replace, hook the wirework back into the
oven sides.
CLEANING THE SHELVES,
WIREWORK RUNNERS AND
GRILL/OVEN FURNITURE
All removable parts, except the grill pan handle,
can be washed in the dishwasher.
The meat tin, grill pan, grill pan grid, oven shelves
and wirework runners may be cleaned using a
soap impregnated steel wool pad. Soaking first in
hot soapy water will make cleaning easier.
CARE OF STAYCLEAN SURFACES
The top, sides and back panels of both ovens are
coated with a Stayclean finish. They should not be
cleaned manually.
Aerosol cleaners must not be used on
Stayclean surfaces and must not come into
contact with elements or the door seal, as this
may cause damage.
During normal use the Stayclean coating will
become splashed with fats and food residues. By
running the oven without food, the Stayclean
surfaces burn off any soilage. Regular use of the
oven cleaning cycle will help to keep the panels in
good condition. See page 30.
29
Ensure that the wirework runners are
firmly in place before refitting the
oven shelves.
SIDE PANEL
CAVITY
CENTRE