Electrolux C41029G - Manual (Page 21)

Instructions for the user
21
9. Special maintenance
Periodically, it is necessary to maintain or replace some parts that are subject to wear and tear.
Specific instructions are given below for each type of maintenance.
Before carrying out maintenance, switch off the power supply to the appliance and close the
gas tap.
9.1 Removing the oven door
In order to clean the oven door more thoroughly, we recommend removing it as follows:
• open the door completely;
• hook the rings A onto the appropriate seats in the hinges (Fig. A);
• lift the door slightly and remove it (Fig. B);
• place the door on a horizontal surface;
• unscrew the screw B using a screwdriver and remove the tab C (Fig. C);
• clean the glass D (Fig. C) and door components as described in section “8.7.1 Cleaning the
oven door”;
• afterwards, follow the removal instructions in reverse order.
9.2 Replacing the oven light bulb
Proceed as follows:
• open the oven door;
• unscrew the glass safety cap anticlockwise (Fig. D); unscrew the bulb and replace it with
another one for high temperatures (300°C) with the following characteristics:
Voltage: 230 V / 50 Hz
Power: 15 W
Attachment: E 14
• Refit the glass cap and switch on the power. It is possible to check that the oven light is
working even when the door is closed by turning the function switch knob to position .