Electrolux 65070 Vi - Manual (Page 31)

31
Installing the dishwasher
• The dishwasher must be installed on a firm floor and adjusted to en-
sure that it is stable and level in all directions.
• To compensate for unevenness in
the floor and to match the height
of the appliance to that of sur-
rounding units, extend the thread-
ed feet using a screwdriver.
• The drain hose, inlet hose and
mains cable must be laid so that
they are able to move freely within
the plinth area, and so that they
are not kinked or crushed when the
dishwasher is in position.
• The dishwasher must also be
screwed tightly to the work surface
or to the adjoining units. This is essential to ensure the dishwasher
does not tip up.
Dishwashers that can be fully integrated
(see installation template supplied)
3
The door of the appliance can be fitted with a wooden door/cupboard
door with the following dimensions:
Using the installation template supplied split cupboard doors can be
easily installed and firmly fitted.
Width: 591 mm – 594 mm
Depth: 16 mm – 24 mm
Height: max. 715 mm
Weight: max. 10 kg