EverFocus EAN850A - Manual (Page 32)

EAN850A
32
~x128.
1. Please direct the arrow to point to “SENS UP” on the SETUP menu by using the
UP and DOWN buttons.
2. Select the mode you would like to operate by pressing the LEFT or RIGHT
button.
Ö AUTO: Low light level auto mode. Default value is AUTO (Up to X 10).
Ö OFF: The function is disabled.
3. Press SET button when you finish all the settings.
LIMIT
> AUTO X 10
SETUP
LENS DC <┘
SHUTTER ___
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
> SENS-UP AUTO <┘
SPECIAL <┘
EXIT
Note:
1. The maximum storage magnification in low light level movement situations can
be adjusted by pressing the mini-joystick in “AUTO” mode.
2. The screen becomes brighter when the magnification increases; yet the after
image increases as well.
3. Please be noted that spots and noise may appear if storage magnification
increases when SENS-UP is operating. This is a normal phenomenon.