EverFocus EAN850A User Manual

Page 28

EAN850A

ESC: (Reserved).

Manual: (Reserved)

2. Press SET button when you finish all the settings.

4.4.2.3 WHITE BALANCE Control
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please direct the arrow to point to “WHITE BAL” on the SETUP menu by using

the UP and DOWN buttons.

2. Please select the mode you would like to operate by pressing the LEFT or RIGHT

button.

Please select one of the 3 modes below:

ATW (Auto Tracking White Balance): This mode can be used within the

color temperature range from 2,500°K to 8,300°K (eg, fluorescent light,
outdoor, sodium vapor lamp or inside tunnels).

AWC (Auto White Balance Control): Press the SET button while the camera

is directed at a piece of white paper to get the optimum state under the

BRIGHTNESS

BRIGHTNESS |+++++++++| 25

SHUTTER

> MANUAL 1/50

SETUP

LENS MANUAL

> SHUTTER MANUAL

<┘

WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
SENS-UP ___
SPECIAL

<┘

EXIT

SETUP

LENS MANUAL

> SHUTTER ESC

<┘

WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
SENS-UP AUTO

<┘

SPECIAL

<┘

EXIT

Note:

With DC lens, the shutter speed is fixed as 1/60 for NTSC and 1/50 for PAL.