Electrolux FM 4300G-an - Manual (Page 9)

9
Before Use
Protect the Vitroceramic hob
Clean the burners
Before using the product for the first
time, clean off any factory residues
such as dust or dirt. Give the vitroce-
ramic hob a protective coating
before using it. This will make it
easier to clean the hob and will pre-
vent spills etc. burning on too hard.
This is what you do:
1. Remove the pan support(s), burn-
er ring and burner cover.
2. Sprinkle a few drops of a vitroce-
ramic cleaning agent onto a piece
of kitchen paper and rub into the
whole surface.
3. Polish the hob with a clean cloth
until dry.
Wash the pan grid, burner covers
and burner rings in hot water and
washing-up liquid.