Electrolux FM 4300G-an - Manual (Page 22)

22
1. Cut a hole in the worktop of the
given dimensions, see “Technical
data”, “installation dimensions”.
2. Place the hob upside down on a
soft underlay. Make sure not to
scratch the top surface.
3. Mount the fixings in the holes in
the sides of the base box. (See
fig.).
4. Insert the hob in the hole and
tighten the fixings to the worktop
with a Phillips screwdriver.
However, to ensure accessi-
bility to the gas connection
there should generally be at
least 50 mm between the
rear of the hole for the gas
hob and the wall behind it.
Mounted clamping fittings