Connecting video inputs, To connect video sources to your monitor – eMachines Flat Panel Monitor User Manual
Page 7
www.emachines.com
3
3
Tighten the thumbscrew under the base with your fingers or a flat screwdriver under the
base to secure the neck into place.
Connecting video inputs
To connect video sources to your monitor:
1
Position your computer and the monitor so you can reach the back of each.
2
If your computer has a digital video connector (DVI), connect a DVI video cable (not included)
to the white connector under the back of the display. You can buy a DVI video cable from
www.gateway.com
.
- OR -
Tip
When using the optional speaker bar (described in “Setting up the optional
speaker bar” on page 11), we recommend that you use the included right-angle VGA
cable for the video connection so the speaker bar does not obstruct the cable. If you
are using a DVI connection, you can order a right-angle DVI cable from
www.gateway.com
.
8512327.book Page 3 Thursday, May 10, 2007 3:45 PM