5 slide the adjustable stand’s neck onto the base – eMachines Flat Panel Monitor User Manual
Page 10
Using Your eMachines Flat-Panel Monitor
6
4
Remove the four small screws from the back of the LCD panel. Save the four screws.
5
Slide the adjustable stand’s neck onto the base.
6
Tighten the thumbscrew under the base with your fingers (or a flat screwdriver) under the
base to secure the neck into place.
Screw
Screw
Screw
Screw
Thumbscrew
8512327.book Page 6 Thursday, May 10, 2007 3:45 PM