Emerson Radio HD9116BL User Manual

Page 7

Connecting The Stereo Headphones And Remote Control

• Connect the plug of the supplied stereo headphones directly to the green-colored

PHONES jack on the left side of the cabinet.

• Or you may connect the headphones to the supplied Remote Control, then to

the

PHONES jack.

NOTE: The control buttons

( Play/Pause),

(Stop),

(Skip Forward),

(Skip Reverse), VOL+, and VOL– function same as those on front panel.

NOTE: Make sure that the plugs are inserted into the jacks as far as they will

go. If the plugs are not fully inserted, you may only hear sound from one side

of the headphones.

IMPORTANT!

Always set the VOL– control to a low level before you put the headphones on and

begin playing a CD. Then start playback and gradually increase the volume to a

comfortable listening level. Do not play the CD at loud volume levels that might

prevent you from hearing warning sounds such as car horns, etc.

HD9116_041006.p65

10/4/2006, 9:33