Emerson Radio HD9116BL - Manual (Page 17)

16
Programmed Playback
You can program up to 20 tracks on a disc to play in any desired order.
NOTE: You can program a disc either during playback or in Stop mode.
1.) Press the PROG button once. The PROG indicator and
and the track number ‘00’ begin flashing.
The Program Number “01” appear
2.) Press the or button to select the first track to be
programmed.
Example: Track “07”.
3.) When the desired track number is flashing in the display
press the PROG button again to enter the desired track
number in Program Number “01”.
The track number returns to “00” and the Program
Number advances to “02”.
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the (Play/Pause) button to begin programmed
playback.
The PROG indicator remains in the display.
NOTES:
• Playback begins with the first track you programmed and continues until
all programmed tracks have been played, and then the player stops. The
programmed sequence will remain in the memory until the power shuts off
(approximately 30 seconds) or until the CD door is opened.
• If you press the PROG and (Play/Pause) buttons again before the
power shuts off the programmed sequence will play again.
HD9116_041006.p65 10/4/2006, 9:10 16