Electrolux E24CM76GSS - Manual (Page 16)

16
Installation
INSTAllING THe UNIT IN THe CABINeT
While supporting the coffee maker from below, insert it into the cabinet
cutout. As you insert it into the cabinet, line up the glides on the appliance
with the cabinet glides. The appliance should glide on the rails when slight
pressure is applied to the front of the coffee maker. If it does not glide
smoothly, check the distance between the glides again.
As you slide the coffee maker into the cabinet the locking tab on the glides
will engage.
COFFee MAKeR ReMOvAl
If you need to remove the unit from the cabinet:
Disconnect the power plug from the power receptacle.
Press the respective locking tabs on the glides and remove the appliance,
supporting it from below.
•
•
•
•
Locking Tab