Deleting saved memory settings, Resetting the projector – Epson PRO CINEMA 800 User Manual

Page 42

Making Detailed Adjustments

Deleting Saved Memory Settings

You can clear all your memory settings at once.

1. Press the

button on the remote control.

2. Open the

Memory

menu, then select

Reset Memory

3. Press the

Select

button to delete the memory settings.

Resetting the Projector

If the image quality isn’t what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.

To restore the settings in a specific menu (such as the Image or Settings menu), open that
menu, select

Reset

, and confirm as needed. The example below shows how to reset the

Picture menu settings:

You can also reset the lamp usage timer or restore all the projector settings to their original
values. Follow these steps:

1. Press the

button on the remote control.

2. Open the

Reset

menu.

3. Do one of the following:

■

Select

Reset Lamp Hours

to clear the lamp usage timer and reset it to zero

You should reset the lamp timer only when you install a new projector lamp. See
page 52 for more information.

■

Select

Reset All

to return all projector settings to their original defaults (except Input

A, Save Memory, and Language).

Open the Picture
menu . . .

. . . and select
Reset