Ericsson HM200c/HM201c - Manual (Page 2)

PipeRider® Cable Modem User's Guide HM200c/HM201c
Safety Information
Read these safety instructions before attempting to install or operate the PipeRider cable modem. Carefully read
the Installation Procedures and Operating Procedures provided in this User's Guide. Be sure to comply with all
NOTES, WARNINGS, and CAUTIONS.
CAUTIONS AND WARNINGS
For indoor home and office use only!
There are no serviceable parts inside the unit. DO NOT OPEN!
Do not set liquids on or near the cable modem!
Before cleaning the modem, unplug the power cord!
When cleaning the modem, use only a soft cloth dampened with water! DO
NOT spray water, household chemicals, or other liquids directly onto the
modem.
Any changes or modifications to this product not expressly approved by
the manufacturer could void any assurances of Safety or Performance and
could result in violation of Part 15 of the FCC Rules.
When installing the modem, ensure that the vents are not blocked!
Warranty is voided if unit is opened!
PRODUCT CARE AND MAINTENANCE
The PipeRider cable modem is a highly sophisticated electronic device. To prevent damage to the modem, follow
the rules below.
Do not expose the modem to liquid or moisture.
●
Do not expose the modem to extreme high or low temperatures.
●
Do not expose the modem to lit candles, cigarettes, open flames, etc.
●
Do not drop, throw, or bend the modem since rough treatment could damage it.
●
Do not paint the modem as the paint could prevent normal use.
●
Do not attempt to disassemble the modem; a broken warranty seal will void the warranty. In the event that
the modem requires service, contact your Service Provider.
●
Do not use any accessories other than those approved by Ericsson. Failure to do so may result in loss of
performance, damage to the product, fire, electric shock or injury, and will void the warranty.
●
Keep the modem in a clean and dust-free environment.
●
Store the Support CD in a safe place for future reference.
●
PLACEMENT
The cable modem should be mounted or placed in a safe location with plenty of ventilation. To prevent the
restriction of airflow in and around the cable modem, do not place any object (book, magazine, paper, etc.)
on top of the modem.
●
If the modem is mounted on the wall, the modem must be securely attached. If the modem is not securely
mounted to the wall, the modem may fall and cause injury to someone or damage the product.
●
CABLES
The cables connected to the cable modem should be routed in a manner that provides a safe environment
and protects the cables. Do not route the cables in a walkway or in a location that will crimp the cables.
●
POWER SUPPLY
The PipeRider cable modem should only be used with the AC power supply provided.
●
The AC power supply should be plugged into a surge protected power source. In addition, be careful not to
overload the wall outlets, extension cords, etc. used to power this unit.
●
The AC power supply must not be used outdoors or in damp areas.
●