Echo SHAFT HEDGE CLIPPER HCA-265 - Manual (Page 28)

28
MODEL ---------------------------------------------------- HCA-265
Length ------------------------------------------------------- 2365 mm (93.1in.)
Width -------------------------------------------------------- 245 mm (9.65 in.)
Height ------------------------------------------------------- 250 mm (9.84 in.)
Weight (dry) ----------------------------------------------- 7.12 kg (15.7 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 34.0 mm (1.34 in.)
Stroke -------------------------------------------------------- 28.0 mm (1.10 in.)
Displacement ----------------------------------------------- 25.4 cc (1.55 cu. in.)
Exhaust System -------------------------------------------- Spark arrestor muffler or spark arrestor muffler with catalyst
Carburetor--------------------------------------------------- Zama Model w/purge
Ignition System -------------------------------------------- Flywheel Magneto, CDI (capacitor discharge ignition)
Spark Plug -------------------------------------------------- BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ---------------------------------------------- 50 : 1 Power Blend X™ ISO-L-EGD (ISO/CD 13738) and
J.A.S.O. M345- FC/FD, two-stroke, air-cooled engine oil.
Gasoline ----------------------------------------------------- Use 89 Octane unleaded. Do not use fuel containing methyl
alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use
alternative fuels such as E-15 or E-85.
Oil ------------------------------------------------------------ Power Blend X TM Premium Universal 2-Stroke Oil
Fuel Tank Capacity --------------------------------------- 0.5 lit. (16.9 US fl. oz.)
Starter System ---------------------------------------------- Automatic Rewind Starter
Clutch-------------------------------------------------------- Centrifugal Type
Gear Case Ratio -------------------------------------------- 3.95 : 1
Cutter ------------------------------------------------------- Double Reciprocating Blade - Double Edge
Effective Length ----------------------------------------- 464 mm (18.5 in.)
Pitch ------------------------------------------------------- 35 mm (1.38 in.)
Maximum Diameter Cut
Soft Material ---------------------------------------------- 25.4 mm (1 in.)
Woody Material ------------------------------------------- 13 mm (1/2 in.)
Cutting Angle Adjustment -------------------------------- -30 ~ 180 Degrees in 15 degree increments
Idle Speed --------------------------------------------------- 2,600 - 3,100 RPM
Clutch Engagement Speed -------------------------------- 3,900 RPM
Wide Open Throttle Speed ------------------------------- 10,400 - 11,400 RPM
s
pecIfIcatIons