Polaris 2016 600 Indy - Manual (Page 42)

40
FEATURES
Instrument Cluster (Digital/Analog)
Rider Information Center
Security System (Ignition Lock System)
Locking the System With Your Personal Security Code
1. Start the engine and lock the parking brake.
2. Press and hold the MODE and SET buttons
for 3 seconds, then release. SECURE OFF
should be displayed. If not, repeat this step.
3. Wait until ENTER displays, then press and
release SET to advance the digit. When the
first digit of your security code is displayed,
press and release MODE to accept the digit.
TIP: If the ENTER screen exits due to inactivity, repeat
step 2.
4. Continue to use SET and MODE to select
and accept the remaining two digits of the
code.
5. After accepting the third digit, view the dis-
play screen. SECURE ON displays if the
system locks. Engine speed is now limited
and the snowmobile cannot be driven.
TIP: When the engine is running, the display will
alternate between SECURE ON and ENTER.
6. If BAD CODE displays, the screen will
then return to the ENTER screen. Repeat
steps 3-5 to re-enter the security code.