Polaris 2010 FST IQ Touring - Manual (Page 142)

139
MAINTENANCE
Extended Storage
Off-season or extended storage of your snowmobile requires preventive
measures to aid against deterioration and to prolong the useful life of
many components. See page 141 for the part numbers of Polaris prod-
ucts.
Cleaning and Preservation
Proper storage starts with cleaning, washing, and waxing the hood,
chassis, and plastic parts. Wipe down remaining surfaces with a damp
cloth. Clean and touch up with paint any rusted or previously painted
surfaces. Be sure that corrosive salt and acids are removed from surfaces
before beginning preservation with waxes and rust inhibitors (grease, oil
or paint).
The snowmobile should be stored in a dry garage or shed, out of direct
sunlight, and covered with a fabric snowmobile cover. Plastic tarp may
cause condensation to form and damage snowmobile components.
Battery Maintenance
Remove the battery and recharge it as outlined on page 138. Store the
battery in a cool, dry place.
Controls and Linkage
Lubricate all bushings and cables at the intervals outlined in the Periodic
Maintenance Table beginning on page 91.
Bearings
Grease the jackshaft and drive shaft clutch side bearings with Polaris
Premium All-Season Grease or a similar high quality grease to prevent
corrosion.
Clutch and Drive System
Remove the drive belt and store in a cool dry location. Do not lubricate
clutch components, except the driven clutch shaft bushing as outlined in
the service manual. See your dealer.