Eaton Electrical Extended Battery Module (EBM) 9140 - Manual (Page 27)

INSTALLATION
EATON Powerware ® 9140 EBM User’s Guide S 164201623 Rev A FINAL DRAFT 2006 July 14 21
7. Place the EBM on a flat, stable surface with the front of the EBM
facing toward you.
8. If the front and rear mounting brackets are already installed, skip to
Step 11. If the brackets are not already installed, continue to Step 9.
9. Align the two front mounting brackets with the screw holes on the
sides of the EBM and secure with eight supplied M4 flat-head
screws (see Figure 6).
10. Align the two rear mounting brackets with the lowest two screw
holes on the sides of the EBM and secure with four supplied M4
flat-head screws.
Front Mounting
Brackets (2)
Rear Mounting
Brackets (2)
Figure 6. Installing the EBM Front and Rear Mounting Brackets