Polaris 2005 440 IQ - Manual (Page 44)

41
THE PERFECT FIT
Handlebar Adjustments
Handlebar with Riser Block
1. Remove the handlebar cover to
expose the handlebar mounting
hardware.
2. Using a 1/4” Allen wrench, loosen
the two bolts on the bottom of the
riser or the two bolts on the top of the
riser, depending on the type of
adjustment required.
3. Adjust the handlebar to the desired
angle. Be sure the handlebar, brake
lever and throttle lever operate
smoothly and do not hit the gas tank,
windshield or any other part of the
machine when the handlebar is turned fully to the left or right.
4. Torque the handlebar adjuster block bolts to 11-13 ft. lbs. (15-17.6
Nm).
5. Replace the handlebar cover.