Polaris 2008 Victory Vegas - Manual (Page 82)

77
OPERATION
Braking
To slow the motorcycle with the brakes, close the throttle and apply the front and rear brakes evenly. As the
motorcycle slows, either disengage the clutch or downshift each time your speed reaches a downshift point.
Applying slightly more front brake than rear brake generally gives you the best braking performance. Do not apply
the brakes so forcefully or quickly that either wheel stops rotating. Leave sufficient distance so you can apply the
brakes gradually if you need to stop.
• Do not apply either brake so strongly that the wheel stops rotating. This may cause loss of control.
• Braking hard on wet, rough, loose, or slippery surfaces can cause the motorcycle to skid, and you
could lose control of the motorcycle. Apply the brakes lightly on such surfaces.
• Braking while in a curve can cause loss of control. Bring the motorcycle to the upright position before
applying the brakes, and avoid applying the brakes in a corner if at all possible.
WARNING