Polaris 2000 Victory Special Edition - Manual (Page 53)

46
MAINTENANCE
Fuse Replacement
The fuses are located on the left side of the mo-
torcycle under the left body side cover.
1. To access the fuses, remove seat.
2. Rotate fasteners 1/4 turn counter
clockwise and lift upward until
disengaged.
3. Pull top of cover outward (toward you) until
cover is clear of the battery.
4. Push cover down to disengage locating
pin on bottom of cover. Set cover aside.
5. Push back the tabs on each side of the fuse box cover and lift cover off. NOTE:
the cover must be installed with the double cut-out (1) facing forward.
Fuse Size for Application
Specified Fuse Size
Main Fuse “A” 10 amp “Blade” type fuse
Main Fuse “B” 20 amp “Blade” type fuse
All other fuses 10 amp “Blade” type fuses
If any fuse is blown, turn off the main switch and determine which fuse is blown.
Install a new fuse of the specified amperage. Turn on the switches and see if the
system operates correctly. If the fuse blows again, see your Victory dealer.
CAUTION Do not use fuses of a higher amperage rating than what is speci-
fied. If the correctly rated fuse continues to blow, something is wrong and needs
to be corrected. Substituting a higher amperage fuse can lead to extensive electri-
cal system damage and possibly a fire.
Fuse Box Diagram
1
IGNITION
RELAY
HEADLAMP
RELAY
ECM
RELAY
TO POWER CORD
10A 20A
10A
10A 10A
FUEL PUMP
RELAY
Fuel Pump ECM
Diode
Starter
Main Ignition
Brake Flasher
Ignition
Horn
Headlamp