Control parts and functions – Polaris 2000 Victory Special Edition User Manual

Page 23

CONTROL PARTS AND FUNCTIONS

Left Handlebar Controls

1. Dimmer and passing light

switch is pushed up for the high

beam, middle position is low

beam and bottom position is mo-

mentary passing beam.
2. Turn signal switch is

pushed to the right to signal a

right hand turn and pushed to the

left to signal a left hand turn.

Once the switch is released it will

return to the center position. To

cancel the signal, push the

switch in after it has returned to

the center position. NOTE: The

turn signals are self cancelling at

speeds above 6 miles per hour.
3. Horn switch sounds the

horn when pressed.
4. Fast idle lever is for cold

starting (See page 29 for starting

procedure).
5. Set Selector: (A) Odome-

ter, (B) Trip Odometer, (C) Clock,

(D) Back Light Dimming, (E)

High Beam Icon Dimming, (F)

Fuel Level, (G) Charging Sys-

tem Voltage, (H) Diagnostics, (I)

English/Metric Display. NOTE:

These features are used in con-

junction with the mode selector.

(See page 51 for setting proce-

dure.)

LH Driver’s View

LH Front Side