Polaris 2015 ATV Interactive Digital Display - Manual (Page 19)

18
When Go To is turned ON in the Waypoint Manager, an
arrow displays on the map, pointing in the direction of the
selected waypoint. This feature can be used for only one
waypoint at a time.
1. Press Key 5 to toggle to the selection list.
2. Press Key 4 until Go To is highlighted. Press Key 5 to
toggle the setting ON or OFF.
3. Press Key 5 to exit the map.
NOTE: When Go To is ON, the arrow points to the
waypoint that was selected when Go To was turned
ON.
Key 1 Key 2 Key 3 Key 4 Key 5
Key 1 Key 2 Key 3 Key 4 Key 5